Bootstrapping the Kubernetes Control Plane

In this lab you will bootstrap the Kubernetes control plane across three compute instances and configure it for high availability. You will also create an external load balancer that exposes the Kubernetes API Servers to remote clients. The following components will be installed on each node: Kubernetes API Server, Scheduler, and Controller Manager.

Prerequisites

The commands in this lab must be run on each controller instance: controller-0, controller-1, and controller-2. Login to each controller instance using the gcloud command.

gcloud compute ssh controller-0

gcloud compute ssh controller-1

gcloud compute ssh controller-2

Running commands in parallel with tmux

tmux can be used to run commands on multiple compute instances at the same time.

Provision the Kubernetes Control Plane

Create the Kubernetes configuration directory:

sudo mkdir -p /etc/kubernetes/config

Download and Install the Kubernetes Controller Binaries

Download the official Kubernetes release binaries:

wget -q --show-progress --https-only --timestamping \
  "https://storage.googleapis.com/kubernetes-release/release/v1.12.0/bin/linux/amd64/kube-apiserver" \
  "https://storage.googleapis.com/kubernetes-release/release/v1.12.0/bin/linux/amd64/kube-controller-manager" \
  "https://storage.googleapis.com/kubernetes-release/release/v1.12.0/bin/linux/amd64/kube-scheduler" \
  "https://storage.googleapis.com/kubernetes-release/release/v1.12.0/bin/linux/amd64/kubectl"

kube-apiserver                                       100%[======================================================================================================================>] 183.84M   249MB/s    in 0.7s
kube-controller-manager                              100%[======================================================================================================================>] 155.39M   208MB/s    in 0.7s
kube-scheduler                                       100%[======================================================================================================================>]  54.53M   196MB/s    in 0.3s
kubectl                                              100%[======================================================================================================================>]  54.69M  77.0MB/s    in 0.7s

Install the Kubernetes binaries:

{
  chmod +x kube-apiserver kube-controller-manager kube-scheduler kubectl
  sudo mv kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/
}

Configure the Kubernetes API Server

{
  sudo mkdir -p /var/lib/kubernetes/

  sudo mv ca.pem ca-key.pem kubernetes-key.pem kubernetes.pem \
    service-account-key.pem service-account.pem \
    encryption-config.yaml /var/lib/kubernetes/
}

The instance internal IP address will be used to advertise the API Server to members of the cluster. Retrieve the internal IP address for the current compute instance:

INTERNAL_IP=$(curl -s -H "Metadata-Flavor: Google" \
  http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/ip)
echo $INTERNAL_IP

10.240.0.10

Create the kube-apiserver.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
ExecStart=/usr/local/bin/kube-apiserver \\
  --advertise-address=${INTERNAL_IP} \\
  --allow-privileged=true \\
  --apiserver-count=3 \\
  --audit-log-maxage=30 \\
  --audit-log-maxbackup=3 \\
  --audit-log-maxsize=100 \\
  --audit-log-path=/var/log/audit.log \\
  --authorization-mode=Node,RBAC \\
  --bind-address=0.0.0.0 \\
  --client-ca-file=/var/lib/kubernetes/ca.pem \\
  --enable-admission-plugins=Initializers,NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \\
  --enable-swagger-ui=true \\
  --etcd-cafile=/var/lib/kubernetes/ca.pem \\
  --etcd-certfile=/var/lib/kubernetes/kubernetes.pem \\
  --etcd-keyfile=/var/lib/kubernetes/kubernetes-key.pem \\
  --etcd-servers=https://10.240.0.10:2379,https://10.240.0.11:2379,https://10.240.0.12:2379 \\
  --event-ttl=1h \\
  --experimental-encryption-provider-config=/var/lib/kubernetes/encryption-config.yaml \\
  --kubelet-certificate-authority=/var/lib/kubernetes/ca.pem \\
  --kubelet-client-certificate=/var/lib/kubernetes/kubernetes.pem \\
  --kubelet-client-key=/var/lib/kubernetes/kubernetes-key.pem \\
  --kubelet-https=true \\
  --runtime-config=api/all \\
  --service-account-key-file=/var/lib/kubernetes/service-account.pem \\
  --service-cluster-ip-range=10.32.0.0/24 \\
  --service-node-port-range=30000-32767 \\
  --tls-cert-file=/var/lib/kubernetes/kubernetes.pem \\
  --tls-private-key-file=/var/lib/kubernetes/kubernetes-key.pem \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Configure the Kubernetes Controller Manager

Move the kube-controller-manager kubeconfig into place:

sudo mv kube-controller-manager.kubeconfig /var/lib/kubernetes/

Create the kube-controller-manager.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
ExecStart=/usr/local/bin/kube-controller-manager \\
  --address=0.0.0.0 \\
  --cluster-cidr=10.200.0.0/16 \\
  --cluster-name=kubernetes \\
  --cluster-signing-cert-file=/var/lib/kubernetes/ca.pem \\
  --cluster-signing-key-file=/var/lib/kubernetes/ca-key.pem \\
  --kubeconfig=/var/lib/kubernetes/kube-controller-manager.kubeconfig \\
  --leader-elect=true \\
  --root-ca-file=/var/lib/kubernetes/ca.pem \\
  --service-account-private-key-file=/var/lib/kubernetes/service-account-key.pem \\
  --service-cluster-ip-range=10.32.0.0/24 \\
  --use-service-account-credentials=true \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Configure the Kubernetes Scheduler

Move the kube-scheduler kubeconfig into place:

sudo mv kube-scheduler.kubeconfig /var/lib/kubernetes/

Create the kube-scheduler.yaml configuration file:

cat <<EOF | sudo tee /etc/kubernetes/config/kube-scheduler.yaml
apiVersion: componentconfig/v1alpha1
kind: KubeSchedulerConfiguration
clientConnection:
  kubeconfig: "/var/lib/kubernetes/kube-scheduler.kubeconfig"
leaderElection:
  leaderElect: true
EOF

Create the kube-scheduler.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
ExecStart=/usr/local/bin/kube-scheduler \\
  --config=/etc/kubernetes/config/kube-scheduler.yaml \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Start the Controller Services

{
  sudo systemctl daemon-reload
  sudo systemctl enable kube-apiserver kube-controller-manager kube-scheduler
  sudo systemctl start kube-apiserver kube-controller-manager kube-scheduler
}

Created symlink /etc/systemd/system/multi-user.target.wants/kube-apiserver.service → /etc/systemd/system/kube-apiserver.service.
Created symlink /etc/systemd/system/multi-user.target.wants/kube-controller-manager.service → /etc/systemd/system/kube-controller-manager.service.
Created symlink /etc/systemd/system/multi-user.target.wants/kube-scheduler.service → /etc/systemd/system/kube-scheduler.service.

Allow up to 10 seconds for the Kubernetes API Server to fully initialize.

Enable HTTP Health Checks

A Google Network Load Balancer will be used to distribute traffic across the three API servers and allow each API server to terminate TLS connections and validate client certificates. The network load balancer only supports HTTP health checks which means the HTTPS endpoint exposed by the API server cannot be used. As a workaround the nginx webserver can be used to proxy HTTP health checks. In this section nginx will be installed and configured to accept HTTP health checks on port 80 and proxy the connections to the API server on https://127.0.0.1:6443/healthz.

The /healthz API server endpoint does not require authentication by default.

Install a basic web server to handle HTTP health checks:

sudo apt-get install -y nginx

cat > kubernetes.default.svc.cluster.local <<EOF
server {
  listen      80;
  server_name kubernetes.default.svc.cluster.local;

  location /healthz {
     proxy_pass                    https://127.0.0.1:6443/healthz;
     proxy_ssl_trusted_certificate /var/lib/kubernetes/ca.pem;
  }
}
EOF

{
  sudo mv kubernetes.default.svc.cluster.local \
    /etc/nginx/sites-available/kubernetes.default.svc.cluster.local

  sudo ln -s /etc/nginx/sites-available/kubernetes.default.svc.cluster.local /etc/nginx/sites-enabled/
}

sudo systemctl restart nginx

sudo systemctl enable nginx

Synchronizing state of nginx.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable nginx

Verification

kubectl get componentstatuses --kubeconfig admin.kubeconfig

NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok
scheduler            Healthy   ok
etcd-0               Healthy   {"health":"true"}
etcd-1               Healthy   {"health":"true"}
etcd-2               Healthy   {"health":"true"}

Test the nginx HTTP health check proxy:

curl -H "Host: kubernetes.default.svc.cluster.local" -i http://127.0.0.1/healthz

HTTP/1.1 200 OK
Server: nginx/1.14.0 (Ubuntu)
Date: Sat, 05 Jan 2019 11:12:03 GMT
Content-Type: text/plain; charset=utf-8
Content-Length: 2
Connection: keep-alive

ok

Remember to run the above commands on each controller node: controller-0, controller-1, and controller-2.

RBAC for Kubelet Authorization

In this section you will configure RBAC permissions to allow the Kubernetes API Server to access the Kubelet API on each worker node. Access to the Kubelet API is required for retrieving metrics, logs, and executing commands in pods.

This tutorial sets the Kubelet --authorization-mode flag to Webhook. Webhook mode uses the SubjectAccessReview API to determine authorization.

gcloud compute ssh controller-0

Create the system:kube-apiserver-to-kubelet ClusterRole with permissions to access the Kubelet API and perform most common tasks associated with managing pods:

cat <<EOF | kubectl apply --kubeconfig admin.kubeconfig -f -
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRole
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: "true"
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
  name: system:kube-apiserver-to-kubelet
rules:
  - apiGroups:
      - ""
    resources:
      - nodes/proxy
      - nodes/stats
      - nodes/log
      - nodes/spec
      - nodes/metrics
    verbs:
      - "*"
EOF

clusterrole.rbac.authorization.k8s.io/system:kube-apiserver-to-kubelet created

The Kubernetes API Server authenticates to the Kubelet as the kubernetes user using the client certificate as defined by the --kubelet-client-certificate flag.

Bind the system:kube-apiserver-to-kubelet ClusterRole to the kubernetes user:

cat <<EOF | kubectl apply --kubeconfig admin.kubeconfig -f -
apiVersion: rbac.authorization.k8s.io/v1beta1
kind: ClusterRoleBinding
metadata:
  name: system:kube-apiserver
  namespace: ""
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:kube-apiserver-to-kubelet
subjects:
  - apiGroup: rbac.authorization.k8s.io
    kind: User
    name: kubernetes
EOF

clusterrolebinding.rbac.authorization.k8s.io/system:kube-apiserver created

The Kubernetes Frontend Load Balancer

In this section you will provision an external load balancer to front the Kubernetes API Servers. The kubernetes-the-hard-way static IP address will be attached to the resulting load balancer.

The compute instances created in this tutorial will not have permission to complete this section. Run the following commands from the same machine used to create the compute instances.

Provision a Network Load Balancer

Create the external load balancer network resources:

{
  KUBERNETES_PUBLIC_ADDRESS=$(gcloud compute addresses describe kubernetes-the-hard-way \
    --region $(gcloud config get-value compute/region) \
    --format 'value(address)')

  gcloud compute http-health-checks create kubernetes \
    --description "Kubernetes Health Check" \
    --host "kubernetes.default.svc.cluster.local" \
    --request-path "/healthz"

  gcloud compute firewall-rules create kubernetes-the-hard-way-allow-health-check \
    --network kubernetes-the-hard-way \
    --source-ranges 209.85.152.0/22,209.85.204.0/22,35.191.0.0/16 \
    --allow tcp

  gcloud compute target-pools create kubernetes-target-pool \
    --http-health-check kubernetes

  gcloud compute target-pools add-instances kubernetes-target-pool \
   --instances controller-0,controller-1,controller-2

  gcloud compute forwarding-rules create kubernetes-forwarding-rule \
    --address ${KUBERNETES_PUBLIC_ADDRESS} \
    --ports 6443 \
    --region $(gcloud config get-value compute/region) \
    --target-pool kubernetes-target-pool
}

Created [https://www.googleapis.com/compute/v1/projects/espblufi-android/global/httpHealthChecks/kubernetes].
NAME        HOST                                  PORT  REQUEST_PATH
kubernetes  kubernetes.default.svc.cluster.local  80    /healthz
Creating firewall...⠛Created [https://www.googleapis.com/compute/v1/projects/espblufi-android/global/firewalls/kubernetes-the-hard-way-allow-health-check].
Creating firewall...done.
NAME                                        NETWORK                  DIRECTION  PRIORITY  ALLOW  DENY  DISABLED
kubernetes-the-hard-way-allow-health-check  kubernetes-the-hard-way  INGRESS    1000      tcp          False
Created [https://www.googleapis.com/compute/v1/projects/espblufi-android/regions/us-west1/targetPools/kubernetes-target-pool].
NAME                    REGION    SESSION_AFFINITY  BACKUP  HEALTH_CHECKS
kubernetes-target-pool  us-west1  NONE                      kubernetes
Updated [https://www.googleapis.com/compute/v1/projects/espblufi-android/regions/us-west1/targetPools/kubernetes-target-pool].
Created [https://www.googleapis.com/compute/v1/projects/espblufi-android/regions/us-west1/forwardingRules/kubernetes-forwarding-rule].

Verification

Retrieve the kubernetes-the-hard-way static IP address:

KUBERNETES_PUBLIC_ADDRESS=$(gcloud compute addresses describe kubernetes-the-hard-way \
  --region $(gcloud config get-value compute/region) \
  --format 'value(address)')
echo $KUBERNETES_PUBLIC_ADDRESS

35.247.56.87

Make a HTTP request for the Kubernetes version info:

curl --cacert ca.pem https://${KUBERNETES_PUBLIC_ADDRESS}:6443/version

{
  "major": "1",
  "minor": "12",
  "gitVersion": "v1.12.0",
  "gitCommit": "0ed33881dc4355495f623c6f22e7dd0b7632b7c0",
  "gitTreeState": "clean",
  "buildDate": "2018-09-27T16:55:41Z",
  "goVersion": "go1.10.4",
  "compiler": "gc",
  "platform": "linux/amd64"
}

Bootstrapping the Control Plane

Bootstrapping the Kubernetes Control Plane

Bootstrapping the Kubernetes Control Plane

Prerequisites

Running commands in parallel with tmux

Provision the Kubernetes Control Plane

Download and Install the Kubernetes Controller Binaries

Configure the Kubernetes API Server

Configure the Kubernetes Controller Manager

Configure the Kubernetes Scheduler

Start the Controller Services

Enable HTTP Health Checks

Verification

RBAC for Kubelet Authorization

The Kubernetes Frontend Load Balancer

Provision a Network Load Balancer

Verification

results matching ""

No results matching ""